Subaru E-Brake Handle

$100.00
SKU
STi-EBH

This product only fits:

  • All Scion FRS
  • All Subaru BRZ
  • 2002+ Subaru Impreza, WRX, STi (all Imprezas)
  • All 2002-2008 Subaru Forester 

 

The E-Brake Handle is designed to enhance the visual effects on the interior of your car. The new handle can be cut from either 6061 Aluminum, 303 Stainless Steel, Grade 2 Titanium, Alloy 360 Brass or colored Copolymer. The handle replaces the stock handle. These parts are not stocked, I make each one from scratch when you order it (same with all my shifter parts). 

IMPORTANT:  If your car has a leather boot that wraps around the bottom of the brake handle, this piece will fit directly on. However, if your car has a longer handle that extends down through a slotted rubber curtain, you will want to get a new fabric shift boot to cover up the gap that will form with this new handle. See the last photo in the gallery to understand what I mean.

INSTALLATION: First, unscrew the Ebrake Button. (You may need pliers as this part is glued on).

Then, remove the stock handle using a blow dryer (or heat gun) to soften up the glue holding the handle in place. Then use a strap wrench to twist it back and forth while pulling up to work it off the metal handle. Slide the new handle on (set screws facing down) and position the screws so one is facing up and the others are on each side (no screws on the bottom because the metal arm is slotted on the bottom). Gently but firmly tighten the 3 screws (don't overdo it). Then slide the boot over the screws. Install e-brake button (I recommend getting a new matching one from me at the same time).

GENERAL SPECIFICATIONS:

  • Direct slide-on installation. No glue needed.
  • Solid metal or copolymer construction
  • Variety of material and finish choices
  • Easy installation, professional appearance
  • Can be optioned with grooves and/or a knurled grip
Write Your Own Review
You're reviewing:Subaru E-Brake Handle
Your Rating
Copyright © 2018 WC Lathe Werks. All Rights Reserved.